Retrofitting a PAX into a closet

Materials: PAX wardrobe , LYNGDAL doors, wood trim, mitre saw, table saw, chop saw, nails, screws Description: After looking at PAX wardrobes and also at several nice hacks here , we decided to remove our 1950s built in closet and replace it with a set of PAX wardrobes. Our closet measured 58″ across, so two 29 1/2″ wardrobe pieces would be close. We decided to maximize the closet so we chose the taller wardrobes. To make these fit, we had to enlarge the opening of the original closet by cutting up several inches, and also taking the plaster off the left side of the closet.

See the rest here:
Retrofitting a PAX into a closet

Related posts:

  1. Cassette Tape Closet by Creative Barn
  2. EXPEDIT Wardrobe

Tags: , ,