CFE Rocking Seat by Mariana Aguila

Chances are if you live anywhere near a city you see those spiraled cables attached to electricity and telephone poles and they’re just what inspired Mariana Aguila to design a rocking seat called CFE . Those cables are the lifeline that provides every city with power, phone lines, and other resources and most of the time, we don’t even think about them. No doubt this design will have you looking at them differently in the future and actually taking notice. Made from three different sized powder-coated metal tubes that are joined together, the seat can be used flat or to rock back and forth on. Photos by Karla Agis and Mariana Aguila

Go here to see the original:
CFE Rocking Seat by Mariana Aguila

Refitting an attic room – storage and room divider

Materials: Pax and Bergsbo

Description:
Objectives : designing and planning our attic room with storage (many for Mrs !) and a little office zone.

Initial situation : 25 sq metres without any divider and without any storage

IKEA Materials :
-2 Pax wardrobes in 100 x 240 cm
-1 pax Add-on corner unit (240 cm)
-3 Pax wardrobes in 50 x 192 cm
-5 Bergsbo doors
-1 mirror door

Other materials
-A door
-milled panels
-insulation plates (wool and hemp)
-many battens

Steps
1. Assembling and fixing against the wall the 2 huge Pax wardrobes and the Pax Add-on corner without forgetting technical shaft (phone, electricity and ethernet)

2. Fixing battens on the back of pax wardrobes vertically and up to the ceiling
3. Fixing the door with battens
4. Mounting the wall with milled panels without forgetting to put insulation plates between battens

5. Finishing the wall with milled panels

6. Reshaping of the 3 192 cm pax wardrobes to fit under the roof and fixing against the wall

7. Reshaping Bergsbo doors and fixing

Here we are ….. many many storage and a really nice and insulated divider !

~ Madotter, Paris region